Around the House, Featured

DIY Cloth Napkins

It’s almost Earth Day…celebrate by ditching the paper napkins and making your own cloth napkins with “fat quarter” quilting fabric!

Confession time:  I have a quilting fabric addiction…and I’m not even a quilter! Something about the tiny floral patterns and the myriad of pretty colors is so attractive to me. I’m particularly vulnerable to the coordinated “fat quarter” collections. These are the cute little bundles of five or six 18″ x 21″ rectangles of fabric. Over the years I’ve bought quite a few bundles, for no other reason than because they were cute!

Well, about two years ago, in an effort to cut back on our paper waste, I decided to put my collection of fabric to good use and make cloth napkins. Here’s the step by step! Continue reading “DIY Cloth Napkins”

In the Garden

DIY Garden Light Hut

I can’t take credit for this idea. Our science book for homeschool last year, Apologia’s Exploring Creation With Botany by Jeannie K. Fulbright, included instructions on how to create this as its first lab/activity. I knew as soon as we put this together at the beginning of the school year that I would be using it again in the spring for my seedlings! Last year’s did get a little mildewed by the end of the season (what with all the watering that was going on,) so I made a new one this year (pictured here.) It’s assembly is pretty straight forward, and all the supplies can be easily picked up from your own stash or at a hardware store. Best of all, it works! My little sprouts were healthy and happy during their entire stay.

You’ll need:

  • A cardboard box (about the size of a copy paper box)
  • Foil
  • glue or tape
  • 13-15 watt fluorescent spiral bulb
  • light socket with plug
  • extension cord
  • plastic oatmeal lid, or styrofoam plate
  • scissors and exacto knife or box cutter

The Assembly:

  1. Cut a 1 inch hole in the center of your plastic plate or lid and trim it to create a 4-5 inch disk with the hole in the center.
  2. Position your box on its end and cut a 1 inch hole in the top center of the box.
  3. Cut ventilation slots on the top, upper sides, and back top of your box (this will aid air flow and allow heat to escape.
  4. Line the inside of your box with foil, covering all the sides (photo does not show all sides covered yet, obviously) using tape or glue to secure the foil in place.
  5. Cut the foil away from the top hole and the ventilation holes. Take care to secure the foil by the center hole so no loose foil hangs around the hole (you don’t want it to come in contact with the light bulb, which comes next.)
  6. Push the base of the light bulb through the hole in the top of the box and place the plate on the box so that the base of the bulb sticks through it as well. Then screw the socket onto the bulb. (I’m sorry I don’t have a better photo of this step, hopefully you get the idea from the photo below.)
  7.  Attach your extension cord and you are good to go!

Place your little peat pot darlings on some kind of saucer so that the bottom of your box doesn’t get wet. Last year, mine managed to get wet anyway – I’m trying to be a little more careful with my watering this year. 🙂

There you have it! Now, a little word of caution: I’m a bit of a freak when it comes to electricity, heat and paper products being in such close proximity to each other, so I am very diligent in checking my box to make sure it’s not getting too hot around the bulb or socket – and it never does. Even so, I never leave this on while I’m away from the house. Just sayin’.

If you decide to make this light hut, I hope you and your plants enjoy it thoroughly!

In the Garden

Clothes Pin Garden Markers

My husband goes to a lot of conferences for his job. At each, he gets a lanyard name tag. He saves them on the door knob of his home office. In the past, I have put them to good use on diaper bags and lunch coolers (my son had a food allergy so I would have to prominently label “NO EGG” on all his belongings,) but since the days of diapers and allergy tags are behind us, the tags have kind of accumulated, unused. Until now!

Today I was trying to devise a semi-waterproof garden tag using what I already had on hand. I knew I wanted to use the wood clothes pins I had lying around – their “clipability” seemed perfectly suited for garden tags, but I wasn’t sure how to waterproof the tag itself. Enter the lanyard tags.

I simply removed the tags from their lanyards and slid the front of the seed packets into the pocket. With the opening of the name tag facing down, I clipped the clothespin to the tag. For the packets that still had seeds in them, I ran off a copy of the front of the packet instead (Hubberman’s home office is helping out a lot with this project.) 🙂

Time will tell just how water-resistant these guys will be. I’m sure the clothespins will break down over time, but no less than the popsicle sticks I used last year.

I also found some other adorable ways to use clothespins as markers on the web. If my idea doesn’t float your boat, try one of these:,,20390908_20793608,00.html

Have a terrific weekend!